12 Way 100 A DP Metalclad Mainswitch Incomer EV Consumer Unit with PME Fault Detection
- No earth rods required
- Pre-wired PME fault detection of over/under voltage to reg. 722.411.4.1 (iv) of BS 7671
- Automatic disconnection of phase, neutral and earth
- Complete with Low Noise 40 A 4P Contactor which offers zero-hum
- DP Type A RCBOs as standard
- Dual RCD & high integrity options available
- Surge protection optional
- Additional information
- Datasheet
Additional information
| Height | 256 mm |
|---|---|
| Width | 489 mm |
| Depth | 119 mm |
| Short Circuit Rating | 16kA |
| Terminal Cable Capacity | 50 mm2 |
| Torque | 2-2.5 Nm. |
| Mounting | Wall Mounted |
| Guarantee | 10 Years |
| Frequency | 50 Hz |
| Busbar Rating | 100 A |
| Cable Entry | Selection of Knockouts / Cutouts |
| Current Rating | 100A |
| Cable Clamp | Cage Clamp |
| Rated Operated Voltage | 230V ac. |
| Incoming Terminal Capacity | 50 mm2 |
| Terminal Type | Cage Clamp |
| Number of Modules | 22 |
| Number of Outgoing Ways | 12 |
| Packaging Types | Each |
| Product Range | Proteus EV |
| Standards | BSEN 61439-3 |
| Protection Class IP Rating | IP4Xc |
| Lockable | Available On Request |
| Operating Characteristics | Type A |
| Enclosure | colour RAL7035, Steel |
| Door Covers | Steel cover c/w letterbox lid |
| Switchgear Fitted | 100 A DP Isolator, 40 A DP RCBO Type A & 40 A 4 Pole N/O Contactor |
| Material | Steel |
| Finish | Powder Coated RAL 9010 Matt |
| EV Charger Circuits | 1 |




















